Allen Pro Tiller Extension Universal Joint
Main image Click to view image in fullscreen 
![]()
Replacement universal joint for Allen tiller extensions.
- SKU
- AL-A5198
£7.09
£6.75
In stock
Description
Replacement universal joint for Allen tiller extensions.
Completely omni-directional in operation and capable of many millions of flexures without failure.
Your extension can be completely removed for security reasons or to allow swapping simply, by unclipping the cap and sliding the universal joint out of the base.
To fit 16mm tube, internal diameter must be 13mm and fitted with rivet, screw, bolt
Is compatible with the RWO Omniflex joints.
For greatest longevity store your flexi joint in it's natural position (not bent) either by positioning it that way or remove the extension from the tiller.
Note that the image showing how it fits to a round tiller is using a round to flat saddle
| SKU | AL-A5198 |
|---|
Reviews
.
Product Questions (4)
Customer Questions
Hi JamesIt doesn't come with any fixings as it could be screwed, bolted or rivetedOur fixings are on the below linkhttps://www.tridentuk.com/gb/paints-glues-maintenance-materials/screws-bolts-tools.htmlOr give us a callRegardsDavid
Sorry for the delayed reply, you could use self tappers, pop rivets or bolt right through if you have to The fixing hole is 5mm Regards David
Hi Dave It depends what it is going through, if this is replacing a broken joint there'll already be a fixing/hole in the tiller I would say an alloy pop rivet about 4mm, 5mm max width & about 8-10mm long, if bolting through use a 3mm or 4mm max. Normally these joints fit pretty well inside the tube and a single alloy rivet prevents them going anywhere Regards David
-10%
-10%
Loading...
Loading...