Wayfarer Mast Pivot Pin

Wayfarer Mast Pivot Pin is manufactured in the UK
The mast pivot pin goes through the mast and the side supports about 300mm up from the mast foot.
SKU
SN166-380-01
In stock
Description

Wayfarer mast pivot pin fits through the tabernacle gate about 300mm up from the mast foot to allow the mast to be lowered around it.

The old mast pivot pins used to be about 12-15mm wide but the new ones are 8mm with washers on the end so they fit new and old. 

More Information
SKUSN166-380-01
Old Product Number 063160
Reviews
.
Product Questions (4)
Customer Questions
Hi, this is an 8mm diameter pin. Best Regards, Kieran Parslow
loader
Loading...
Hi JiriThe mast pivot pin goes through the mast and the side supports about 300mm up from the mast foot.The old mast pivot pins used to be about 12-15mm wide but the new ones are 8mm with washers on the end so they fit new and old. The fairlead you are after is a A.153 or A4153 which has a stainless insert https://www.tridentuk.com/gb/product-2-low-profile-fairleads-7mm-al-a-153-2.html https://www.tridentuk.com/gb/product-2-low-profile-fairleads-with-s-s-lining-6mm-al-a4153-2.html I hope that helpsDavid
loader
Loading...
Hi Keith Our pin is 140mm washer to washer maximum internal measurement Regards David
loader
Loading...
Hi Jim, The usable length is 140mm Overall length 150mm 8mm diameter Regards David
loader
Loading...
Who Bought This Also Bought
loader
Loading...
loader
Loading...