Standard Launching Trolley - Upto 16ft 6in
Main image Click to view image in fullscreen 
![]()
Standard launching trolley for dinghies and small boats upto 16ft6 long or 5m.
- SKU
- TRTRA165LT
£354.00
In stock
Description
Standard launching trolley for dinghies and small boats up to 16 foot 6 inch long or 5 meters.
Suitable for
- Boss
- Comet Trio
- Contender
- Hornet
- Kestral
- Javelin
- Laser 16
- Phantom
- Snipe
- Swordfish
- Wayfarer
- Wineglass
- Yeoman
- Any other dinghy or small boat upto 16ft6 long or 5m (Please note if you are putting an outboard motor on the back you will need a large trolley).
Specification
- A-frame galvanised steel construction, providing long lasting care free use.
- Adjustable full width cradle.
- 16inch pneumatic tyres, with plastic hubs, totally corrosion resistance.
- High front handle to make handling easier.
- 'D' rubber protector on all supports
- This trolley has a keel roller to protect your boat's keel from damage, while sliding the boat on.
- Supplied flat packed to allow shipping and supplied with tools and instructions (allow 15 minutes for assembly)
Delivered Free to most of the Mainland UK.
Add a nose wheel and bracket to make handling the trolley easier (it saves the need of lifting the front of the trolley).
| SKU | TRTRA165LT |
|---|
Reviews
.
Product Questions (10)
Customer Questions
Hi, we can make a custom trolley to meet any requirements you may have.May I however suggest that you go for a standard trolley and also purchase our Tow Ball Coupling for Launching Trolley. The advantage of this will be that it can be removed when not being used, it can be used with other trolleys, and your trolley will still fit onto a road base for normal road towing.If the tractor has a pin style coupling rather than a ball coupling we could make you a Tow Ball Coupling for Launching Trolley suitable for the pin style coupling. Best Regards, Kieran Parslow
Hi Roger We do a heavy duty launching trolley for boats upto 14.5 feet but it isn't on our website sorry It is the same as the 165 trolley in price and spec. but is a little shorter and would better suit the YWDB If you want to go ahead I guess the best way forward would be to give us a call I hope that is of use. Best Regards, David Shilling
Hi MarcinIs it possible to measure the balance point of your boat or the length of your current trolley?I will then be able to work out how best to continueBalance your boat making it slightly nose heavy and measure from that point to where the bow will fit to the bow snubber on the trolleyIf you measure your existing trolley we'll need the measurement from axle to bow snubberRegardsDavid
Hi Mark It's difficult to be exact here, 17ft is 6in longer than 16ft 6in. Provided your boat isn't tail heavy it should be ok, the length of the trolley is 10ft so there should still be a light nose weight. If you have any further concerns give me a call to discuss. Many thanks David Gebhard
Hi MarkI think it does however you have the trailer and the measurements for the trolley are in the extra images of the product (you can zoom in to see better or on a pc click on the box with an arrow coming out of it)The trolley will fit at the back but it's the length of your road base I don't knowRegardsDavid
Hi KevinI believe it's a 30mm box sectionRegardsDavid
Hi BrianThe side arms are 3050mm longI will say that the trolley can be built and taken apart easily but it isn't designed to do so and if the boat can't be transported on the trolley it may be easier to transport the trolley on the boat?RegardsDavid
Hi, the trolley needed for a Versa is https://www.tridentuk.com/gb/galvanised-dinghy-launching-trolley-up-to-13ft-6in.html which is similar but a bit smaller. Many thanks
Hi Mike Boats up to 170kg would be the largest we'd advise to go on the trolley. Although the trolley could take a heavier boat if there is kit inside with some water it's weight can quickly escalate and if that was compounded with rough terrain, awkward angles of slopes and boat not loaded correctly point loading could cause problems. For heavier boats look at our heavy duty trolley https://www.tridentuk.com/gb/heavy-duty-launching-trolley-upto-16ft6-trtra165hdlt.html Regards David
Hi John This trolley will be way too long as the Magno is just under 13 foot and this trolley is for 16 foot boats Historically the Magno was on a gunwale hung trolley and we do an adjustable gunwale hung trolley which should fit but we haven't tried it on a Magno and out shortest version is for upto 15 foot boats so it would be worth looking at the dimensions and comparing them to your existing trolley or boat https://www.tridentuk.com/gb/launching-trolley-gunwale-hung-for-boats-14-to-15-foot-long.html Le me know what you find and if it's too long (gunwale supports too far aft) we'll look at making shorter side arms Regards David
Loading...
Loading...