Pneumatic Trolley Wheel 16"x4"

The bore length is 65mm and the bore diameter is 1 inchThe bore length can vary from time to time but not greatly 

Our current stock have a 65mm width at the bore of the wheel

Hi thanks for your enquiry, the width of the axle is 65mm and the diameter is 26mm.  Hope this helps, Regards.Jake Gebhard

Hi George,I think as they aren't for road use they don't have a load rating on them, only max. inflation 30 PSI.What sort of weight do you want to carry? as these wheels are used on trolleys that carry loads over 200KgsThe tyre and tube are easily replaced but you will need a lever or twoRegardsDavid 

Hi ManuelWe only sell 1 inner tube and it's for this wheelFollow this link Inner tubeRegardsDavid

Hi AndrewNo bearings as they would be prone to seizing as they pick up dirt, sand, dust as well as being in and out of water and pssible salt etc.The wheels just have a plain plastic bore/bearing surfaceRegardsDavid

Hi Toby These trolley wheels are pretty standard as far as standards go in the boating world. I'd need more information like axle width to confirm Regards David

Hi Peter, Our 16x4 pneumatic wheels do not have bushes, they are solid hubs. I don't know of a 20mm bush sorry, any wheels we supply have a 1 inch bush Regards David

Hi not sure what brand of trolley you have but if it is one of ours it will be a heavy duty trolley and you will need this wheel https://www.tridentuk.com/gb/pneumatic-trolley-wheel-extra-wide-16-x-6-inch.html If it is not our trolley we have these options: The opti-flex puncture proof trolley wheel https://www.tridentuk.com/gb/opti-flex-lite-puncture-proof-solid-trolley-wheel-370mm-diameter-539836.html Pneumatic Trolley Wheel Extra Wide 16" x 6" - the wheel is the same size as the standard trolley wheels however the tyre is wider and you will need to check that it does not obstruct your trolley. https://www.tridentuk.com/gb/pneumatic-trolley-wheel-extra-wide-16-x-6-inch.html Hope this helps