Nose Wheel Bracket

Hi I cant say for sure, but I can give you the dimensions of the tube on the bracket to see if it is compatible with your nose wheel. Internal tube dimension: 26mm Minimum tube length: 70mm I hope this helps and if you have any more questions feel free to get in contact. Regards.Jake Gebhard 

Hi Eric The internal dimension of the tube is approx 28mm so that it will accept a 1"/25.4mm tube. Many thanks David

Hi HelenYes it comes with nuts and bolts to secure itRegardsDavid

Hi MikeYou will need to order a Trolley for up to 14' 6"https://www.tridentuk.com/gb/product-standard-launching-trolley-upto-14ft6-trtra145lt.html a Road Base and the minimum would be a Vario 1https://www.tridentuk.com/gb/trident-vario-1-eu-dinghy-road-base-trailer-sailing-trtravrb1.html You will need to add a mast support to suit your towing vehicle and if required add a nose wheel and bracketThe price should be £910-£970 inc vat delivered I hope that helpsDavid

Hi AmyIt will probably fit but keeping the wheel straight in use may prove difficult.Check your trolley as many tubular trolleys have a nose wheel bracket welded onRegardsDavid

Hi Iain and thanks for your enquiry. The tube length is 70mm give or take a 1mm.  RegardsJake

Hi IainThe tube is just under 70mm or 2 3/4 inchesRegardsDavid

Hi Graham Yes it's hot dipped galvanised Regards David

Hi Eric The wheel and bracket fit fine and as a previous sceptic to the need to have one the work great and make moving the boat around on land a doddle. I can only imagine the comment you refer to is due to some sort of misalignment of expectations. This is designed to be tough, robust and low maintenance in the harshest of environments which include sand, salt, water, weed, mud etc etc and be affordable and we sell loads of them for all sorts of trolleys Regards David

Hi Ann The nose wheel bracket fits to the side arms and can be on the inside or outside, just behind the handle or a little further aft, the main thing is that it doesn't foul the boat and if the trolley goes on a road base the bracket doesn't need removing to do so Regards David