Mirror Alloy Tiller inc Hood

Hi MikeIf your Mirror is aft sheeting then the 609mm belowhttps://www.tridentuk.com/gb/product-allen-tiller-extension-foamgrip-609mm-silver-al-a4898-sv.htmlOr if you prefer a longer tiller extension or you are centre sheeting then the 762mm belowhttps://www.tridentuk.com/gb/product-allen-tiller-extension-foamgrip-762mm-silver-al-a4298-sv.htmlRegardsDavid

Hi Gavin, The tiller comes with a downhaul cleat fitted, if we were to fit an uphaul cleat we would fit it to the aft face of the stock and use a nylon V cleat A.146 but this is not included with the tiller & hood Regards David

Hi Gavin, Yes you cut the tang off the top of the stock head, if you like you can do this in a bit of a Vee to allow the tube to site better on the surface then screw down through the hood and attach the hood to the sides. It is also possible to add a bit of filler inside the hood to pack out the gaps between round and flat surfaces if you have filler to hand but this isn't essential, it's also a good idea to seal the bare wood you have exposed with something before covering with the tiller Regards David