Mirror Trident 2 Piece Mast Rigging Pack

Mirror rigging specifically to fit and use a Trident 2 piece mast which includes the below and is included with the mast as standard.

• Dyneema main halyard with parrel bead to secure halyard to sail
• Prestretched magic speed jib halyard which ties to the jib using a bowline (make sure the knot goes around the forestay when tied).
• Shrouds with narrow slot head shackles to shackle to the mast (need a flat screw driver)
• Forestay with jib halyard strop and lanyard to loop around bow fitting

The 2 piece mast fits the standard Mirror square tenon mast foot, the rig tension is applied by wrapping the forestay around the bow fitting, back up through the wire end and so on to create a few purchases and secured with a series of hitches. Remember to ease the tension after use.
Fitting the shrouds to the boat you may either need longer shackles than normal on the shrouds or vernier adjusters AL-A4272 as the Bermudan rig likes to be raked slightly further forward than the old gunter rig.