LP900S Rule LoPro Submersible Bilge Pump

New from Rule, this automatic pump offers great flexibility in a small compact design. It offers multiple connection options, fitting orientations and operation modes.

• Connections: For 19mm (3/4"), 25mm (1") or 28mm (1 1/8") bore hose.
• Dimensions: 237mm long, 59mm diameter.
• Current Draw: 4(amps)
• Fuse Size: 7.5 amp
• Output: Up to 56 litres/minute (12.5 gallons/minute). Max. recommended discharge head 3m
• Brings Rule pumping power to tight spaces.
• Fully rotating discharge body for installation flexibility.
• Choice of discharge ports supplied with each pump.
• Ignition protected.
• Horizontal or Vertical Mounting
• 3 Operation Modes:
• High water mode; The pump starts when the water level reaches 50mm (2")
• Low water mode; Turn the motor cartridge 180º and the sensor is at 33mm (1.3")
• Full Electronic mode; The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone.