Trolley Nose Wheel Puncture Proof Foam Tyre
Main image Click to view image in fullscreen 
![]()
Fits onto front of trolleys, and trailers to facilitate easy manoeuvring of heavy boats.
- SKU
- TRTRANWW
£57.15
In stock
Description
Fits onto trolleys, and trailers to facilitate easy manoeuvring of heavy boats. Fitted with a 10" foam tyre (outer diameter of tyre is 10") for low maintenance and easy use on various terrains.
Maximum advised nose weight of trolley 25Kg
You will require a nose wheel bracket to attach it unless there is one already fitted (the max length the tube can be is 70mm or it will need to be cut down or a Nose Wheel Bracket bought). The verticle shaft is a 25mm tube which has been hot dip galvanised
You will need a bracket for our trolleys, excliding heavy duty trolleys.
The standard bracket fits to 25mm and 30mm square box section side arms.
| SKU | TRTRANWW |
|---|
Reviews
.
Product Questions (14)
Customer Questions
Hi, the Nose Wheel Deluxe has attached 3 R Clips and 3 nylon washers. Best Regards
Yes the wheel is included. There is no standard Trolley nose wheel just the Deluxe, please be aware that you will also need a Nose Wheel Bracket to attach the Nose Wheel Deluxe to the Trolley! Regards.Jake Gebhard
Hi DaveThe tube is 25mm /1inch and it has then been galvanisedI hope that helpsDavid
Hi DaveWe don't have tubes sorry, just replacement wheels with tyre, tube and air!RegardsDavid
Hi, the measurement you require is approx 70mm. We would also advise to take into account the galvanised washer supplied that is 2-3mm. Thanks.
Hi BillyGood question and not one I have a specific answer for sorry. If you are using this for what it is designed for I wouldn't imagine it carrying anything greater than 20 kgs. It is designed to take weights heavier than this as loads on the wheel will increase with use, e.g. when the boat has water in or is on a slip or hits a pot hole in the road.I hope that is of useRegardsDavid
Hi Nigel, sorry but I'm a litttle confused with the above. Did you mean does the bracket come with he nose wheel for £44.95? The bracket for attaching the nose wheel is an extra and there are two sizes depending on the cross setion of your trolley, also some trollies have a fixing tube already welded to the trolley. We also do a jockey wheel that can bolt onto a trailer as below: https://www.tridentuk.com/gb/product-sliding-jockey-wheel-mp431.html Many thanks
Hi Howard We don't do a solid wheel version sorry, we do have replacement inner tubes https://www.tridentuk.com/gb/inner-tube-for-3-inch-wheels.html I haven't tried it on a trolley wheel but you can buy slime to go in bike inner tubes to prevent punctures (the slime seals the hole) it is about £6 at our ASDA or try a bike shop? May be worth a go? And if you do please let me know how you get on Regards David Shilling
Hi Belinda, Both brackets fit the nose wheel but fit different sized trolleys, I have just changed the description which I think helps The below bracket is for all our standard trolleys https://www.tridentuk.com/gb/product-nose-wheel-bracket-trtranwb.html Regards David
Hi Jeremy The post is 25mm plus a bit of galvo on it Regards David
Hi Heather The nose wheel needs to fit into a tube to keep it vertical in operation, the hole at the front wouldn't do this which is why we supply a nose wheel bracket. The standard bracket is for our trolleys and those with 30mm box section, there is also a 40mm version available for larger box section trolleys and trailers Regards David
Hi Heather I don't understand the reasoning but small wheels are measured by their total diameter and larger wheels are measured by the size of the rim where the tyre sits. The trolley wheel has a total diameter of nearly 10 inches, see link below https://www.tridentuk.com/gb/trolley-wheel-10-x3-sr-nosew.html We used to do a standard nose wheel which had a smaller solid wheel but it only really worked on perfect or near perfect surfaces. The pneumatic wheel works really well and we sell loads of them Regards David
Hi Carl Our nose wheel will fit in but you will probably have to cut it down by 5mm so you can put the pin in Note from product description You will require a nose wheel bracket to attach it unless there is one already fitted (the max length the tube can be is 70mm or it will need to be cut down or a Nose Wheel Bracket bought). Regards David
Hi Neville,
We sell 2 types of nose wheels
The Trolley Nose Wheel Puncture Proof Foam Tyre
And
Trolley Nose Wheel Deluxe
The puncture proof foam tyre version is newer and we haven't made a video of instructions or an image of it in use so have included those in the extra images to give it some context.
Regards
David
Loading...
Loading...